When buying your first hot tub, most people can’t wait for the quiet soak sessions, naturally. Who wouldn’t want to de-stress, relax, and enjoy the soft hot water relieving that tension? Unfortunately, to keep it up to the standard where you can enjoy it like this on a regular basis, the water needs to be safe.
Once you develop an understanding of how to take care of the water and maintain hot tub efficiently and effectively, it’s a relatively straightforward process. When buying the unit, the manufacturer manual will give details on the chemicals recommended for your specific spa.
This booklet will give you essential tips on the seating capacity, how many people you should have at one time max, water volume, and the frequency for cleaning the tub.
This will be a handy companion for a while that you’ll need to refer to often to guide you through various maintenance steps. Let’s explore a few key pieces of information you’ll need to know to get started kim k sports illustrated.
How To Get Started on Basic Water and Spa Maintenance
When new to owning a hot tub, the excitement to fill it and get in is overwhelming. It’s like a child with a toy. Unfortunately, you need to be the grown-up and handle a few water and spa maintenance steps before you can safely get in and wallow in the leisure of the silky hot water.
The first step is reading through the manufacturer’s handbook to learn the mandatory steps to take once the hot tub is installed. When filling the tub with water, a test strip will need to be used to decide the chemical balance so you can add adequate amounts to clean the water.
Make sure to test the water regularly and look after the hot tub safely at https://www.simplexhealth.co.uk/how-to-look-after-your-hot-tub-safely-and-test-the-water-regularly/.
The heater will also need to get the water to temperature before anyone gets in. It would be quite a surprise to slide into what you believe to be a nice warm spa only to be frigid. Let’s look at a few basic details for someone just learning their system.
· The C’s of the hot tub water supply
A priority with a hot tub is the “three C’s,” which include the chemistry, circulation, and cleaning, not necessarily in that order.
1. Water circulation
As the water circulates through the spa, it will go through the filtration system, keeping the particles out of the water. With some hot tubs, an automatic circulation feature works for approximately 15 minutes, about once daily.
Other spas could incorporate a different cycle, with some lacking the capability. In that instance, you’ll want to circulate manually two times each day for 15 minutes at a time. If you intend to use the spa, you can decrease the manual circulation to one time and then your soak.
2. Chemistry
In the same vein as a swimming pool, hot tubs need the chemistry balanced for the water to be hygienic and safe for use. The recommended pH is roughly between “7.4 and 7.6,” since this will keep the sanitizer effective and ensure the plumbing system is damage-free.
The alkalinity should remain between “100 and 150 ppm,” approximately. If you’re in a location where the water is unusually hard, the tub could need more chemicals to decrease the calcium buildup in the unit.
The water should be tested a couple of times each week, but it’s recommended to do it after each use for optimum benefit. Topping the chemicals will likely be necessary with frequent use of the spa.
· Keeping a steady routine
The cleanliness will ensure the health, safety, and hygiene of the water. When the water is clean, you will be able to luxuriate with peace of mind. That will mean a routine care schedule. While hot water is incredible to relax in, unfortunately, bacteria and fungi love it as much.
It’s not only critical to keep it clean for health purposes but for adequate functionality of the system. You can reduce some of the work for yourself by investing in a hot tub cover.
These should stay on whenever the tub is not in use. The cover will keep particles, pests, and other debris from blowing into the water. Visit here for hot tub health and safety tips.
Consider recommendations for a hot tub used regularly, several times in a given week, in your manufacturer’s guide or that you can find online. These will provide details on what to do:
- When needed
- Once each week
- Once each month
- One time per quarter
- Yearly
If you will be using it less, maybe only once or twice a week, speak with your preventive maintenance tech for a more suitable schedule for your cleaning needs. You can also call the manufacturer if you can’t find the details you need in the booklet.
Once you have a routine and you develop an understanding of the testing strips and how to add the chemicals, maintenance should become relatively easy, allowing more time to enjoy the tub.